Steel structure plant reinforcement construction of what matters

Steel structure plant reinforcement construction of what matters

 

In order to ensure the safety of construction and engineering quality, the design and construction of the two sides in detail the preparation of the steel structure of the plant construction program, construction points are as follows:
First, such as the reinforcement of steel structure plant in the majority of the normal production, should be for the workshop production staff and construction personnel to develop specific safety measures, such as seat belt configuration, the use of fire extinguishers, conditions, reasonable arrangements for reinforcement construction And workshop production is staggered.
Second, the construction of the plant if there are flammable materials in the stacking area, should take protective measures and with the safety commissioner to avoid welding when the loss of welding slag caused by fire.
Third, a detailed welding process should be developed to control the welding deformation and to prevent stress concentration.
Fourth, the use of structural steel structure reinforcement structure used bearings, angle and other major components should be processed directly after the completion of the construction platform to use.
5, in the bulk reinforcement work should be carried out before each of the span and form of steel beams should be selected for 2 reinforcement, after loading test, according to the results of the test feedback to improve the reinforcement method or continue to bulk reinforcement operations.
6, if encountered in the steel plant housing panel modified solar power plant, solar panels should be taken into account when the pressure plate coating damage caused by the construction of the battery plate and its support in the roof drag will damage the pressure plate Layer, while the edge of the lock will also damage part of the coating. In view of these problems, should be strict construction management, if necessary, in the roof laying temporary protective layer, the resulting local damage to the coating should be installed after careful inspection and on-site spray spray anti-corrosion coating.