What are the standards used in the use of color steel plate?

With the progress of society and the rapid development of various industries, color steel plate in a growing number of enterprises and industries to show an indispensable role.Then the color steel plate in the normal use of time, should pay attention to what standard:
Color steel pressure plate for industrial plant roof panels, wall panels, in general without insulation requirements, the amount of steel per square meter of about 5 to 11 kg. There are insulation requirements, available mineral wool board, glass wool, Foam and other insulation materials.Pressure plate and concrete combined into a combination of floor, can save the wood template and can be used as load-bearing structure. At the same time to strengthen the pressure plate and concrete binding force, should be pre-solder bolt on the steel or Pressing the two-way stiffener. Roof and wall commonly used thickness of 0.4 to 1.6 mm; for the load-bearing floor or silo when the thickness of 2 to 3 mm or more. Wave height is generally 10 to 200 mm range. Its high thickness ratio should be controlled within 200. When using long roof panels, the slope can be used 2 ~ 5%, then the deflection does not exceed l / 300 (l for the calculation of long).
Color steel plate due to the original plate is very thin, the quality of anti-corrosion coating directly affect the service life, in order to meet the processing and anti-rust requirements, coated steel plate according to the relevant provisions of the inspection. Under normal circumstances thin steel plate can also be used according to the requirements, After the pressure and then coated with anti-rust paint, or the use of stainless steel sheet of the original board.
(Including colored steel plate), galvanized steel sheet, anticorrosive steel sheet (including asbestos asphalt layer) or other thin steel plate, etc. The steel plate adopts organic coated steel plate (or color steel plate) The board has the advantages of light weight, high strength, good seismic performance, fast construction, beautiful appearance and so on. It is a good building material and component. It is mainly used for retaining structure, floor and other structures. According to different function requirements , Pressure plate can be pressed into a waveform, hyperbolic waveform, ribbed, V-shaped, stiff and so on.